Textron JACOBSEN Eclipse 2 - Park Brake Cable; Repair

7-6 4262930-Rev A
BRAKES
7
Repair
Park Brake Cable
Removal
See Figures 7-5 through 7-7.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-5.)
2. Remove transport wheels (if equipped). (See
“Transport Wheels (Optional)” on page 9-2.)
3. Release park brake.
4. Remove handle cover. (See “Handle Cover” on
page 6-4.)
Figure 7-5
NOTE
Record position of cable ties before removing to ensure
correct installation.
5. Remove cable ties (1).
Figure 7-6
6. Loosen set screw (3) and remove brake cable (5)
from lower brake band pin (4) and bracket (2).
7. Remove lower brake band pin (4).
Figure 7-7
8. Remove nut (8), lock washer (9), and screw (6) from
brake lever arm (14).
9. Remove nut (7) from screw (6) and remove brake
cables (13).
10. Remove jam nuts (12) from brake cable sheaths
(11), and slide brake cable sheaths down and
remove from bracket (10).
TN4432
1
1
TN4407
2
4
5
3
TN4641
9
6
8
14
13
10
12
7
11