Textron JACOBSEN Eclipse 2 - Bedknife Backing Assembly

8-22 4262930-Rev A
CUTTING UNIT
8
Bedknife Backing Assembly
Removal
See Figures 8-26 through 8-28.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-5.)
2. Remove cutting unit from mower. (See “Cutting Unit”
on page 8-20.)
Figure 8-26
NOTE
Steps 3 through 5 apply to both sides of the mower.
3. Loosen bedknife adjuster screws (1 and 2).
Figure 8-27
4. Remove the bedknife backing mounting screws (3).
Figure 8-28
5. Remove the bedknife backing assembly (4).
1
TN0893
2
3
TN0937
4
TN0938