ACCESSORIES AND MISCELLANEOUS REPAIR
4203780 First Edition 9-19
9
Brake Pedal
Disassembly and Assembly
See Figure 9-27.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
Figure 9-27
NOTES
• Using the lower hole on brake pedal (11), install
brake switch activator plate (7) so that the external
tooth washer (6) is fully collapsed and the edges of
the brake switch activator plate align with the brake
lever.
• Clean grease fitting (5) before and after lubricating.
• Lubricate grease fitting with grease that meets or
exceeds NLGI Grade 2 LB specifications. Apply
grease with a manual grease gun and fill slowly until
grease begins to seep out. Do not use compressed
air gun.
1 Screw 6 External Tooth Washer 11 Brake Pedal 16 Lock Washer
2 Woodruff Key 7 Brake Switch Activator Plate 12 Lock Washer 17 Brake Hub
3 Set Screw 8 Carriage Bolt 13 Brake Pedal Pad 18 Flat Washer (2)
4 Pedal Pin Nut 9 Nut 14 Pedal Pin
5 Grease Fitting 10 Lock nut 15 Nut
1
T
N
1
8
6
6
18
3
2
17
16
15
4
5
14
12
13
11
10
9
6
7
8
To Next Page
Loading...
