Topcon KR-1W - Page 152

150
FUNCTION SETTING USING SETTINGS SCREEN
SETTING THE TOPOMAP OVERLAY - CROSS SCALE
When analysis results are initially displayed, TopoMap Overlay - Cross Scale can be set to ON
or OFF Before shipment, the default setting is "ON."
1 Tap the of the set item display "TopoMap Overlay - Cross Scale" of
"DISPLAY."
2 Tap the and select "ON" or "OFF."
3 Setting is complete.
SETTING THE TOPOMAP OVERLAY - ANGLE SCALE
When analysis results are initially displayed, TopoMap Overlay - Angle Scale can be set to ON
or OFF. Before shipment, the default setting is "ON."
1 Tap the of the set item display "TopoMap Overlay - Angle Scale" of
"DISPLAY."
2 Tap the and select "ON" or "OFF."
3 Setting is complete.
SETTING THE TOPOMAP OVERLAY - mm GRID SCALE
When analysis results are initially displayed, TopoMap Overlay - Grid Scale can be set to ON
or OFF. Before shipment, the default setting is "OFF."
1 Tap the of the set item display "TopoMap Overlay - mm Grid
Scale" of "DISPLAY."
2 Tap the and select "ON" or "OFF."
3 Setting is complete.
SETTING THE TOPOMAP OVERLAY - PUPIL
When analysis results are initially displayed, TopoMap Overlay - Pupil can be set to ON or
OFF. Before shipment, the default setting is "OFF."
1 Tap the of the set item display "TopoMap Overlay - Pupil" of "DIS-
PLAY."
2 Tap the and select "ON" or "OFF."
3 Setting is complete.
SETTING THE TOPOMAP KERATO AXIS
When analysis results are initially displayed, TopoMap Kerato axis can be set to ON or OFF.
Before shipment, the default setting is "None."
1 Tap the of the set item display "TopoMap Kerato Axis" of "DIS-
PLAY."
2 Tap the and select "None" or "Sim-K Axis."
3 Setting is complete.
Set Condition button
Setting Change button
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n