Topcon KR-1W - Page 154

152
FUNCTION SETTING USING SETTINGS SCREEN
SETTING OPTOTYPE DIRECTION
The direction of optotype may be set. Before shipment, the default setting is "Right."
1 Tap the n of the set item display "TopoMap Kerato Axis" of "DIS-
PLAY."
2 Tap and select "Up," "Down" or "Right" or "Left" of the .
3 Setting is complete.
SETTING THE NORMALIZATION OF BRIGHTNESS OF SIMULATION (NORMALIZE DESTINY
OF SIMULATIONS)
Normalization of the brightness of the Simulation can be set to "ON" or "OFF". Before ship-
ment, the default setting is "OFF".
1 Tap the of the set item display "Normalize Destiny of Simulations"
of "DISPLAY."
2 Tap the and select "ON" or "OFF."
3 Setting is complete.
SETTING THE DISPLAY STEP OF SPHERICAL/CORNEAL REFRACTIVE POWER
(SPH STEP)
The display step of spherical/corneal refractive power can be set to 0.01D, 0.12D or 0.25D.
Before shipment, the default setting is 0.25D.
1 Tap the of the set item display "Sph Step" of "DISPLAY."
2 Tap the and select "0.25D," "0.12D" or "0.01D."
3 Setting is complete.
SETTING THE DISPLAY STEP OF CYLINDRICAL REFRACTIVE POWER/CORNEAL
ASTIGMATIC POWER (CYL STEP)
The display step of cylindrical refractive power/corneal astigmatic power can be set to 0.01D,
0.12D or 0.25D. Before shipment, the default setting is 0.25D.
1 Tap the of the set item display "Cyl Step" of "DISPLAY."
2 Tap the and select "0.01D," "0.12D" or "0.25D."
3 Setting is complete.
SETTING THE DISPLAY STEP OF ASTIGMATIC AXIS/CORNEAL ASTIGMATIC AXIS (AXIS
STEP)
The display step of astigmatic axis/corneal astigmatic axis can be set to 1° or 5°. Before ship-
ment, the default setting is 1°.
1 Tap the of the set item display "Axis Step" of "DISPLAY."
2 Tap the and select "1°" or "5°."
3 Setting is complete.
Set Condition button
Setting Change button
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n