Toshiba B-FV4 Series User Manual

7. B-FV Setting Tool EO18-33030
7.2 Working with B-FV Setting Tool (V1.0.21)
7-14
LAN
The LAN tab provides network settings, including TCP/IP, Current TCP/IP, Protocol, Server and
SNMP Trap.
Property Name Description
IP Address (TCP/IP) The static IP address of your printer.
Subnet Mask (TCP/IP) The manually specified subnet mask of your printer.
Gateway (TCP/IP) The manually specified gateway of your printer.
IP Address (Current TCP/IP) The current IP address of your printer.
Subnet Mask (Current TCP/IP) The current subnet mask of your printer.
Gateway (Current TCP/IP) The current gateway of your printer.
Socket
Enable The host communicates with your printer via the
socket.
Disable Disable the socket.
Port Number The LAN port number of your printer.
SNMP
Enable The host gets or sets parameters registered as
SNMP entities.
Disable Disable SNMP.
DHCP
Enable The DHCP server assigns the IP address, the
subnet mask and the gateway to your printer automatically.
By default, it is enabled.
Disable You need to specify the IP address, the subnet
mask and the gateway to your printer manually.
Host Name It is the name of a DHCP client. The host name allows up to
32 alphanumeric characters. You can leave it blank or type a
name you want. By default, there is no host name.

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm