Toshiba B-FV4 Series User Manual

7. B-FV Setting Tool EO18-33030
7.4 Working with B-FV Setting Tool (V1.0.27)
7-41
￭ COM
It is the serial port and related to the COM tab in Parameter Setting. The settings of the COM port
need to be the same as those in the COM tab, except for Port Name, which lets you select the
COM port you want if your computer is connected to multiple printers via COM. If you want to reset
all of COM settings, click Default.
￭ LPT
It is the parallel port and only supports simplex communication. That is, the computer can send data
to your printer, but your printer can’t send data back. You can select the printer you want if your
computer is connected to multiple printers via LPT. The default LPT port is LPT1. If you want to
reset the port, click Default.

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm