e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
6 - 10
EF10 Finisher jam
(Saddle section)
Paper not supported for Saddle Stitch Finisher P. 6-66
EF11 Saddle Stitch Finisher stapling error (front) P. 6-66
EF12 Saddle Stitch Finisher stapling error (rear) P. 6-66
EF13 Saddle paper holder home position detection
abnormality
P. 6 - 6 5
EF14 Saddle paper exit jam P. 6-67
EF15 Saddle Stitch Finisher side alignment motor home
position detection abnormality
P. 6 - 6 5
EF16 Saddle Stitch Finisher stacker motor home position
detection abnormality
P. 6 - 6 5
EF17 Saddle Stitch Finisher folding blade home position
detection abnormality
P. 6 - 6 9
EF18 Saddle Stitch Finisher additional folding roller home
position detection abnormality
P. 6 - 6 9
EF19 Saddle paper folding jam P. 6-70
EF20 Saddle stacker jam P. 6-70
EF21 Hole Punch Unit paper leading edge skew detection
abnormality
P. 6 - 7 1
EF22 Hole Punch Unit paper leading edge detection
abnormality
P. 6 - 7 1
EF23 Hole Punch Unit paper alignment abnormality P. 6-72
EF24 Hole Punch Unit paper trailing edge skew detection
abnormality
P. 6 - 7 2
EF25 Hole Punch Unit paper trailing edge detection
abnormality
P. 6 - 7 3
EF27 Hole Punch Unit paper edge detection order
abnormality-1
P. 6 - 7 3
EF28 Hole Punch Unit paper edge detection order
abnormality-2
P. 6 - 7 3
Error code Classification Contents Troubleshooting
To Next Page
Loading...
