Toshiba Strata CTX28 - Page 477

System Error Codes
Trunk Programming Error Codes
Strata CTX Programming - Part 4: Appendices 6/04 B-15
System Error Codes
303
33
)% The channel group entered is out of the range.
52
)%
The entered Channel Group number conflicts with an existing
ISDN extension(s).
80
)%
The entered Channel Group number does not exist.
304
49
)%
)%
The Group Type and Trunk Type are assigned based on the
ILG settings found in ILG field of Program 300 and in ILG field
of Program 302.
49
)%
The entered Pool Key Number cannot be assigned. It belongs
to another ILG number.
49
)%
The entered GCO Key Number cannot be assigned. It
belongs to another ILG number.
49
)%
The digit of DID number cannot change when DID number is
already registered.
80
)%
The entered ILG does not exist in the system.
96
)%
)%
The allowable number of GCO or POOL Key Number has
been exceeded.
96
)% The number of ILGs exceed the system capacity.
305
33
)% The ILG entered is out of the range.
49
)%
The entered ILG number cannot be deleted. Trunk
relationships assigned in Programs 300 and 302 must deleted
first.
80
)% The entered ILG does not exist in the system.
306
49
)%
)%
The Group Type and Trunk Type are assigned based on the
OLG settings found in ILG field of Program 300 and in ILG
field of Program 302.
49
)%
)%
The entered Pool Key Number cannot be assigned. It belongs
to another OLG number.
49
)%
The entered GCO Key Number cannot be assigned. It
belongs to another ILG number.
80
)%
The entered OLG does not exist in the system.
96
)%
The allowable number of OLG Group Number has been
exceeded.
96
)%
)%
)%
The allowable number of GCO or POOL Key Number has
been exceeded.
307
33
)% The OLG entered is out of the range.
49
)%
The entered OLG number cannot be deleted. Trunk
relationships assigned in Programs 300 and 302 must be
deleted first.
80
)% The entered OLG does not exist in the system.
Program Code
Occurred
FB
Sub-
parameter
Error Descriptions