Valleylab CUSA EXcel-8 - Page 196

Return Equipment for Service
14. Pack the CUSA EXcel footswitch into its original packaging, and seal
the packaging with tape.
15. Place the sealed
footswitch packaging
into the corrugated tray.
Note: If returning a
| handpiece, secure it into
its original packaging,
then place the handpiece
packaging into the
corrugated tray.
Install the tray in the top
of the corrugated crate.
16. Install the cover on the
corrugated crate.
17. Secure the shipping crate
closed with two
horizontal bands, two
band seals, and eight box
edge protectors.
18. Secure the shipping crate
to the pallet with two
vertical bands, two band
seals, and four box edge
protectors.
13-8 CUSA EXcel-8 System Service Man