Vertiv Liebert AC8 - Page 124

A.4 View Status Menus
The View Status menu allows any user to view currently active alarms, monitoring data stored in the
alarm, event and trend logs, the status of all inputs and outputs, and the four pager numbers.
Main Menu
After connecting to the Service Terminal Interface, the Main Menu appears, as shown below. This section
presents Service Terminal Interface screens for options 1 through 7:
Main Menu
LIEBERT AC8
VX.XXX.X
LIEBERT CORPORATION COPYRIGHT 2005
ALL RIGHTS RESERVED
MAIN MENU
For sample screens, see:
1=VIEW ACTIVE ALARMS View Active Alarms below
2=VIEW ALARM LOG View Alarm Log on the facing page
3=VIEW EVENT LOG View Event Log on page120
4=VIEW TREND LOG View Trend Log on page122
5=VIEW INPUT & SENSOR STATUS View Input Status on page124
6=VIEW OUTPUT STATUS View Output Status on page125
7=VIEW PAGER NUMBERS View Pager Numbers on page125
8=SILENCE ALARM
9=BACKUP LOG FILES
A=VIEW OPERATION STATUS View Operation on page126
B=VIEW CONTROL RELAYS STATUS View Control Status on page127
0=SETUP SYSTEM - LOGIN REQUIRED
SELECT A NUMBER:1
View Active Alarms
For details on this feature, see View Active Alarms on page37.
View Active Alarms
Vertiv | Liebert® AC8 User Manual | 118