A.5 Silence Alarm & Back Up Log Files
(Service Terminal Interface only)
This section presents two options from the Main Menu that are available via the Service Terminal
Interface only.
Main Menu
After connecting to the Service Terminal Interface, the Main Menu appears, as shown below. This section
presents Service Terminal Interface screens for options 8 and 9:
Main Menu
LIEBERT AC8
VX.XXX.X
LIEBERT CORPORATION COPYRIGHT 2005
ALL RIGHTS RESERVED
MAIN MENU
1=VIEW ACTIVE ALARMS
2=VIEW ALARM LOG
3=VIEW EVENT LOG
4=VIEW TREND LOG
5=VIEW INPUT & SENSOR STATUS
6=VIEW OUTPUT STATUS
7=VIEW PAGER NUMBERS For sample screens, see:
8=SILENCE ALARM
Silence Alarm (Service Terminal
Interface only) below
9=BACKUP LOG FILES
Back Up Log Files (Service Terminal
Interface only) on the facing page
A=VIEW OPERATION STATUS
B=VIEW CONTROL RELAYS STATUS
0=SETUP SYSTEM - LOGIN REQUIRED
SELECT A NUMBER:1
Silence Alarm
(Service Terminal Interface only)
For details on this feature, see Silence Alarm (Service Terminal Interface) on page49.
Vertiv | Liebert® AC8 User Manual | 128
To Next Page
Loading...
