Operation
0130−1/A1
Winterthur Gas & Diesel Ltd.
1/ 1
Prepare the Servo Oil System
1. Servo Oil System − Checks
See 8016−1 Lubricating oil system, Fig. 2 and Fig. 5.
1) Do the checks that follow:
a) Make sure that the ball valve 20-8423_E0_2 (26, Fig. 2) upstream of the injector
valve is closed (see 4003-2).
b) Make sure that the screw plug (1) on servo oil rail (2) is tight (see Fig. 5).
2) Make sure that the service pump (Tool 94845) is disconnected.
Prepare the Engine for Operation
2014
To Next Page
Loading...
