Maintenance2124−2/A2
Winterthur Gas & Diesel Ltd.
6/ 6
21) Remove the chain blocks (94017−004, Fig. 8) shackles (94019H) and eye bolts
(94045−M1).
22) Operate the engine room crane to remove the chain (94205A) and the lifting tool
(94205).
23) Install all lubricating quills (refer to 2138−1).
24) Operate the cylinder lubricating pump on the applicable cylinder liner until oil flows
from all the lubricating grooves (refer to 2138−1, paragraph 5).
25) Install the piston rod gland, refer to 2303−1, paragraph 2.6.
26) Install the piston, refer to 3403−1 paragraph 3 3403−1.
27) Install the cylinder cover, refer to 2708−1 paragraph 4.
2017
Cylinder Liner: Removal and Installation (with optional tool)...................................
To Next Page
