January 2010
2-20
Phaser 7760 Color Laser Printer
003-777, 003-946
Revised
Status Indicator RAP’s
003-777 Power Loss Detected
Power Loss Detected.
Procedure
Verify customer power outlet voltage is correct.
003-946 Tray 2 Out of Place
Tray 2 not in position.
Initial Actions
• Check that the paper size setting is correct.
• Check the Tray 2 Paper Size Sensor for damage or incorrect mounting. Repair or replace
as required.
• Check the Switch Actuators on Tray 2 for wear or damage. Repair or replace as required.
Procedure
Ensure Tray 2 is closed. Turn the printer power Off, then On. The problem continues.
YN
Return to Service Call Procedures.
Go to RAP 007-270, Tray 2 Paper Size Sensor.
To Next Page
Loading...
