Use the Store to WSD feature to scan a job at the press or by sending a command from a network
computer to the press. The scanned data is then sent to a specified network computer.
The following options are available with Store to WSD:
• Computer: Select this option to start a scan job by sending a request from a network computer,
then forward the scanned data to a network computer. The scan job will be operated from the
network computer.
– To operate the scan job from a network computer, use an application which supports image
loading feature such as Windows Fax and Scan.
– Windows Fax and Scan is not available for computers with Windows Vista Home Basic or
Windows Vista Home Premium. To perform a scan from such a computer, use a different
method, for example, using the Paint application and selecting the option From Scanner or
Camera.
• This Device: Select this option to start a scan job from the press UI, and then forward the
scanned data to a network computer. When this option is selected, a list of available computers is
displayed; from this list select the computer that will receive the scanned data.
– When This Device is selected, a List of Components is displayed.
– This list shows computer names and four processing methods including Scan to User PC (this
is a specified network computer), Scan for Print to User PC, Scan for E-mail to User PC, and
Scan for OCR to User PC.
How to Use the Store to Web Services for Devices (WSD) Feature
Using the Store to WSD Feature
1. From the press UI, press the Clear All button.
2. Load your original documents in the document feeder or on the document glass.
3. Press the Home button.
4. Select Store to WSD.
5. From the Start Scan Job From window, choose one of the following options:
• Computer; go to Starting a Scan Job from a Network Computer.
• This Device; go to Starting a Scan Job from This Device.
Starting a Scan Job from a Network Computer
Ensure that the original documents are loaded and that Computer is selected on the Start Scan Job
From window.
Note: The following procedure describes the scan method using Windows Fax and Scan with
Windows 7.
1. Select Operate from Computer.
The UI displays a standby message stating that a scan job is waiting.
2. To exit the standby mode, selectDelete.
The UI displays a Remove Your Original message.
3. Remove your originals and select OK.
4. Reload your originals.
81
To Next Page
Loading...
