Xerox WorkCentre 5024 Service Manual

06/2014
6-16
WC 5022/5024
6.1.22 Alignment Specification
Version 1.0
General
6.1.22 Alignment Specification
• Alignment Measurement Method and Specification (Calculated for 100%)
• Alignment (Calculated for 100%) (Upper IOT Side 1, Lower IOT Side 2)
• (-) means a deviation in the Lead direction while (+) means a deviation in the Tail direc-
tion.
NOTE: Effect of paper elongation and shrinkage due to environmental changes is not included.
*1: Specified in the state where the center of the document is set correctly.
*2: Specified in the state where the Side Guide is set correctly.
*3: The User Adjustment Pitch is 0.254 mm.
*4: The User Adjustment Pitch is 0.135 mm.
• DC Test Pattern (STP3600) (Figure 1)
Table 1
Item
SYSTEM Spec *1 (Platen)
SYSTEM Spec
(DADF)
IOT
IIT DADF Conditions
Tray MSI *2
STM
2TM *5 Tray MSI*2
STM
2TM *5
Lead Regi *3 +/-2.8 mm
+/-3.8 mm
+/-3.6 mm
-
+/-3.6 mm
-
+/-3.8 mm
+/-4.4 mm
+/-2.4 mm
+/-3.4 mm
+/-3.1 mm
-
+/-3.1 mm
-
+/-0.7 mm
-
+/-1.5 mm
+/-1.5 mm
Side Regi *4 +/-3.4 mm
+/-3.8 mm
+/-3.6 mm
-
+/-3.4 mm
-
+/-4.2 mm
+/-4.6 mm
+/-3.0 mm
+/-3.4 mm
+/-3.2 mm
-
+/-3.0 mm
-
+/-0.75 mm
-
+/-1.5 mm
+/-1.5 mm
Lead Skew (200 mm) +/-2.4 mm
+/-2.8 mm
+/-2.7 mm
-
+/-2.4 mm
-
+/-2.8 mm
+/-3.2 mm
+/-1.9 mm
+/-2.3 mm
+/-2.2 mm
-
+/-1.9 mm
-
+/-0.8 mm
-
+/-1.0 mm
+/-1.0 mm
Side Skew (400 mm) +/-4.4 mm
+/-4.6 mm
+/-4.8 mm
-
+/-4.4 mm
-
+/-5.4 mm
+/-5.6 mm
+/-3.8 mm
+/-4.0 mm
+/-4.4 mm
-
+/-3.8 mm
-
+/-1.2 mm
-
+/-2.2 mm
+/-2.2 mm
Horizontal R/E Precision (All
area)
Applicable for 100%
+/-1.05%
+/-1.4%
-
-
- +/-1.6%
+/-2.0%
+/-0.95%
+/-1.3%
-
-
- +/-0.31%
-
+/-0.5%
+/-0.5%
This value is for length of 280 mm
Vertical R/E Precision (All
area)
Applicable for 100%
+/-1.05%
+/-1.4%
- - +/-1.6%
+/-2.0%
+/-0.95%
+/-1.3%
-
-
- +/-0.31% +/-0.5%
+/-0.5%
This value is for length of 400 mm
Perpendicularity (400 mm) +/-3.6 mm - - +/-3.4 mm +/-2.3 mm - - +/-1.7 mm +/-2.2 mm
+/-2.2 mm
Linearity (Vertical) 1.8 mm - - 2.4 mm 1.4 mm -
-
- 0.8 mm
-
0.5 mm
0.5 mm
This value is for length of 400 mm
Linearity (Horizontal) 1.8 mm - - 2.4 mm 1.4 mm - - Not defined - This value is for length of 280 mm
Linearity (Diagonal) 1.8 mm - - 2.4 mm 1.4 mm - - Not defined - This value is for length of 283 mm
Trapezoid Correction (400
mm)
+/-2.1 mm - - +/-3.0 mm +/-2.0 mm - - +/-0.7 mm +/-1.8 mm
(/280 mm)

Xerox WorkCentre 5024 Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	14 s
Print speed (black, normal quality, A3)	12 ppm
Print speed (black, normal quality, A4/US Letter)	24 ppm
Duplex print speed (black, normal quality, A4/US Letter)	17 ppm
Copy speed (black, normal quality, A3)	12 cpm
Copy speed (black, normal quality, A4)	24 cpm
Scan to	E-mail, PC
Scan drivers	TWAIN
Scanner type	ADF scanner
Scan speed (black)	22 ppm
Scan speed (color)	13 ppm
Faxing	-
Modem speed	33.6 Kbit/s
Printing colors	Black
Maximum duty cycle	25000 pages per month
Recommended duty cycle	0 - 25000 pages per month
Number of print cartridges	2
Wi-Fi	No
Email protocols	SMTP
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Internal memory	256 MB
Standard interfaces	USB 2.0
Display	LCD
Product color	Gray
Market positioning	Business
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64
Paper input type	Paper tray
Total input capacity	350 sheets
Total output capacity	- sheets
Maximum input capacity	1850 sheets
Total number of input trays	5
Paper tray media types	Labels, Plain paper, Recycled paper
Paper tray media weight	60 - 90 g/m²
ISO A-series sizes (A0...A9)	A3, A4
ISO B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Power consumption (average operating)	- W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	574 mm
Width	594.3 mm
Height	581.6 mm