4.6 Setup Procedure for Elevator Applications
150 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
2. Connect the cable provided to the CN19 port.
Note: Be sure that the connector fastens at the correct angle to the drive port. The incorrect angle could damage the battery, cable, or
connector.
Figure 4. 38
Figure 4.43 Connecting the Cable
3. Reinstall the drive covers to their original locations.
Figure 4. 39
Figure 4.44 Reinstalling the Covers to the Drive
■ Rescue Operation Torque Limit
The Torque Limit During Rescue Operation is set in parameter S4-05. After Rescue Operation is complete, the drive
utilizes to the torque limits set in the L7 parameters.
A – Front cover 1 C – Terminal cover
B – Front cover 2
SIEP_C710616_38F_5_0.book 150 ページ ２０１５年１１月９日 月曜日 午後３時３６分
To Next Page
Loading...
