4.6 Setup Procedure for Elevator Applications
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual 149
Start-Up Programming &
Operation
4
7. Use a Phillips screwdriver to fasten the screw that holds the CN19 connector cover in place.
NOTICE: Use the screw provided to fasten the connector cover into place. Using a different screw may damage the internal drive
components.
Figure 4.35
Figure 4.40 Reattaching the CN19 Connector Cover
Figure 4.36
Figure 4.41 Drive and Battery CN19 Connection Complete
Models CIMR-LU4A0450 and 0605
1. Use a Phillips screwdriver to remove the drive covers.
Figure 4.37
Figure 4.42 Removing the Connector Cover
A – Front cover 1 C – Terminal cover
B – Front cover 2
Connect
to battery
SIEP_C710616_38F_5_0.book 149 ページ ２０１５年１１月９日 月曜日 午後３時３６分
To Next Page
Loading...
