4.6 Setup Procedure for Elevator Applications
148 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
4. Connect the cable to the CN19 connector port on the drive.
Note: The connector port location and angle vary by drive model.
NOTICE: Be sure that the connector fastens at the correct angle to the CN19 connector port. The incorrect angle could damage the
battery, cable, or connector.
Figure 4. 32
Figure 4.37 Connecting the Cable
5. The cable should pass through the connector cover with the cover fastened to the drive.
Figure 4. 33
Figure 4.38 Reattaching the CN19 Connector Cover
6. Slide the CN19 connector cover back into place as shown in Figure 4.39.
NOTICE: Make sure the cable does not get pinched between the drive and the CN19 connector cover, as this could damage the cable.
Figure 4. 34
Figure 4.39 Sliding the CN19 Connector Cover into Place
SIEP_C710616_38F_5_0.book 148 ページ ２０１５年１１月９日 月曜日 午後３時３６分
To Next Page
Loading...
