YASKAWA L1000A - Page 332

7.4 Drive Cooling Fans and Circulation Fans
332 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
2. Lift up directly on the cooling fan as shown in Figure 7.14. Unplug the relay connector and release the fan from
the drive.
Figure 7. 14
Figure 7.14 Removing the Cooling Fan: 40075 and 40091
■ Installing the Cooling Fan
Reverse the procedure described above to reinstall the cooling fan.
1.
Install the replacement fan into the drive. Align the pins as shown in Figure 7.15.
Figure 7. 15
Figure 7.15 Installing the Cooling Fan: 40075 and 40091
2. Properly connect the fan power lines then replace the power supply connectors and cables into the recess of the
drive.
Figure 7. 16
Figure 7.16 Cooling Fan Power Supply Connectors: 40075 and 40091
A–Back B–Front
YEA_
TMonly
YEA_TM
only
A
B
YEA_TMonly
SIEP_C710616_38F_5_0.book 332 ページ ２０１５年１１月９日 月曜日 午後３時３６分