YASKAWA L1000A - Page 48

2.2 Mechanical Installation
48 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Figure 2.11
Figure 2.12 Panel Cut-Out Dimensions (External/Face-Mount Installation)
Internal/Flush-Mount
An internal flush-mount requires an installation support set that must be purchased separately. Contact a Yaskawa
representative to order an installation support set and mounting hardware. Figure 2.13 illustrates how to attach the
Installation Support Set A.
1.
Cut an opening in the enclosure panel for the digital operator as shown in Figure 2.14.
2. Mount the digital operator to the installation support.
3. Mount the installation support set and digital operator to the enclosure panel.
Figure 2. 12
Figure 2.13 Internal/Flush Mount Installation
Note: Use a gasket between the enclosure panel and the digital operator in environments with a significant amount of dust or other
airborne debris.
Figure 2. 13
Figure 2.14 Panel Cut-Out Dimensions (Internal/Flush-Mount Installation)
22 (0.87)
22 (0.87)
14
(0.55)
26
(1.02)
22 (0.87)
78 (3.07)
2 (0.08)
Unit: mm (in)
YEA_TMonly
Enclosure panel
Digital Operator
Installation Support Set A
M4 × 10
Phillips truss head screw × 4
(for panel widths between 1 and 1.6)
M3 6
Phillips recessed
pan head machine screw × 2
common_TMonly
120 (4.72)
45 (1.77)
89
+0.5 0
(3.50 )
+0.02 0
(2.32 )59
+0.02
0
+0.5
0
Unit : mm (in)
YEA_TMonly
SIEP_C710616_38F_5_0.book 48 ページ ２０１５年１１月９日 月曜日 午後３時３６分