YASKAWA L1000A - Page 67

3.6 Digital Operator and Front Cover
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual 67
Electrical Installation
3
■ Reattaching the Front Cover
Models CIMR-LU20008 to 20075, 40005 to 40039, and 50003 to 50027
Reverse the instructions given in Remove the Front Cover (Models CIMR-LU2  0008 to 2  0075, 4  0005 to 4  0039,
and 5
 0003 to 5  0027) on page 65 to reattach the front cover. Pinch inwards on the hooks found on each side of the
front cover while guiding it back into the drive. Make sure it clicks firmly into place.
Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200
1. Slide the front cover so the hooks on the top connect to the drive.
Figure 3.14
Figure 3.15 Reattach the Front Cover
(Models CIMR- LU20085 to 20415, 40045 to 40605, and 50032 to 50200)
2. After connecting the hooks to the drive, press firmly on the cover to lock it into place.
SIEP_C710616_38F_5_0.book 67 ページ ２０１５年１１月９日 月曜日 午後３時３６分