YASKAWA L1000A - Page 66

3.6 Digital Operator and Front Cover
66 YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200
1. Remove the terminal cover and the digital operator.
2. Loosen the installation screw on the front cover.
3. Use a straight-edge screwdriver to loosen the hooks on each side of the cover that hold it in place.
Figure 3. 12
Figure 3.13 Remove the Front Cover
(Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200)
4. Unhook the left side of the front cover then swing the left side towards you as shown in Figure 3.14 until the
cover comes off.
Figure 3. 13
Figure 3.14 Remove the Front Cover
(Models CIMR-LU20085 to 20415, 40045 to 40605, and 50032 to 50200)
HookHook
Front cover
installation screw
Free hooks on both
sides of the cover
SIEP_C710616_38F_5_0.book 66 ページ ２０１５年１１月９日 月曜日 午後３時３６分