YASKAWA MECHATROLINK Sigma 2 Series - 2 Installation; 2.1 Storage Conditions; 2.2 Installation Site; 2.3 Orientation

2-1
2
2
Installation
This chapter describes precautions for Σ-ΙΙ Series product installation.
The SGDH SERVOPACKs are base-mounted servo controller. Incorrect instal-
lation will cause problems. Always observe the installation precautions shown
in this chapter.
2.1 Storage Conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2
2.2 Installation Site - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2-2
2.3 Orientation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-3
2.4 Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-4