YASKAWA MECHATROLINK Sigma 2 Series User Manual

v
v
 Related Manuals
Refer to the following manuals as required.
Read this manual carefully to ensure the proper use of Σ-ΙΙ Series servodrives. Also, keep
this manual in a safe place so that it can be referred to whenever necessary.
Manual Name Manual Number Contents
Σ-II Series SGMH/SGDH
User’s Manual
SIEPS80000005 Provides detailed information on selecting
Σ-II Series Servodrives/Servomotors and
capacities, and detailed information on
installation, wiring, trial operation, using
functions, maintenance, and inspection.
Σ-ΙΙ Series SGMH/SGDM
Digital Operator
Operation Manual
TOE-S800-34 Provides detailed information on the opera-
tion of the JUSP-OP02A-2 Digital Opera-
tor, which is an optional product.
High-speed Field Network
MECHATROLINK System
User’s Manual
SIE-S800-26.1 Provides detailed information on the
MECHATROLINK system.
High-speed Field Network
MECHATROLINK
Servo Command User’s Manual
SIE-S800-26.2 Describes the Servo commands for use in a
MECHATROLINK system.

YASKAWA MECHATROLINK Sigma 2 Series Specifications

General

Brand	YASKAWA
Model	MECHATROLINK Sigma 2 Series
Category	Control Unit
Language	English