Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
82
Parameters
Permitted
Values
Default
Description:
Configures the port of the STUN (Simple Traversal of UDP over NATs) server.
Example:
sip.nat_stun.port = 3478
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->NAT->STUN Port(1024~65000)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->NAT->STUN Port
account.X.nat.nat_traversal
(X ranges from 1 to 16)
0 or 1
0
Description:
Enables or disables the NAT traversal for account X.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “sip.nat_stun.enable” is set to 1
(Enabled).
Web User Interface:
Account->Register->NAT
Phone User Interface:
Settings->Advanced (default password: admin) ->Accounts->AccountX->NAT Status
sip.listen_port
Integer from
1024 to 65535
5060
Description:
Configures the local SIP port.
Web User Interface:
Settings->SIP->Local SIP Port
Phone User Interface:
None
sip.tls_listen_port
Integer from
1024 to 65535
5061
Description: