Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
144
Parameters
Permitted Values
Default
Phone User Interface:
None
phone_setting.hold_and_held_power_led_flash_enable
0 or 1
0
Description:
Enables or disables the power indicator LED to flash when a call is placed on hold or is held.
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) red)
Web User Interface:
Features->Power LED->Hold/Held Power Light Flash
Phone User Interface:
None
phone_setting.talk_and_dial_power_led_enable
0 or 1
0
Description:
Enables or disables the power indicator LED to be turned on when the IP phone is busy.
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
Web User Interface:
Features->Power LED->Talk/Dial Power Light On
Phone User Interface:
None
To configure the power Indicator LED via web user interface:
1. Click on Features->Power LED.
2. Select the desired value from the pull-down list of Common Power Light On.
3. Select the desired value from the pull-down list of Ringing Power Light Flash.
4. Select the desired value from the pull-down list of Voice/Text Mail Power Light Flash.
5. Select the desired value from the pull-down list of Mute Power Light Flash.
6. Select the desired value from the pull-down list of Hold/Held Power Light Flash.