Configuring Advanced Features
171
5. If you use outbound proxy servers, do the following:
1) Select Enabled from the pull-down list of Enable Outbound Proxy Server.
2) Enter the desired IP address or domain name in the Outbound Proxy Server 1/2 field
and the desired port of the outbound proxy server 1/2 in the Port field respectively.
3) Enter the desired interval in the Proxy Fallback Interval field.
6. Click Confirm to accept the change.
To configure the interval for re-register when registration fails via web user interface:
1. Click Account->Advanced.
2. Select the desired account from the pull-down list of Account.
To Next Page
Loading...
