Configuring Advanced Features
193
To configure the DST via web user interface:
1. Click on Settings->Time & Date.
2. Select Disabled from the pull-down list of Manual Time.
3. Select the desired time zone from the pull-down list of Time Zone.
4. Enter the domain name or IP address in the Primary NTP Server and Secondary NTP
Server field respectively.
5. Enter the desired time interval in the Synchronism (15~86400s) field.
6. Mark the Enabled radio box in the Daylight Saving Time field.
- Mark the DST by Date radio box in the Fixed Type field.
Enter the start time in the Start Date field.
Enter the end time in the End Date field.
To Next Page
Loading...
Need help?
General
