Administrator’s Guide for SIP-T5 Series Smart Media Phones
194
- Mark the DST by Week radio box in the Fixed Type field.
Select the desired values of DST Start Month, DST Start Week of Month, DST Start
Day of Week, Start Hour of Day; DST Stop Month, DST Stop Week of Month, DST
Stop Day of Week and End Hour of Day from the pull-down lists.
7. Enter the desired offset time in the Offset(minutes) field.
8. Click Confirm to accept the change.
Customizing an AutoDST Template File
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the DST is
set to Automatic, the IP phone obtains the DST configuration from the AutoDST file. You can
customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone
and DST settings for your area each year.
Before customizing, you need to obtain the AutoDST file. You can ask the distributor or Yealink
FAE for DST template. You can also obtain the DST template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. For more
information on obtaining the template file, refer to Obtaining Configuration Files and Resource
Files on page 114.
The following table lists description of each element in the template file:
Time Zone item’s root
element
[+/-][X]:[Y], X=0~14, Y=0~59
String (if the content is more
than one city, it is the best to
To Next Page
Loading...
Need help?
General
