Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
230
dialplan.area_code.code
dialplan.area_code.min_len
dialplan.area_code.max_len
dialplan.area_code.line_id
Web User Interface
Create the area code rule and specify
the maximum and minimum lengths of
entered numbers.
Navigate to:
http://<phoneIPAddress>/servlet?m=
mod_data&p=settings-dialplan&q=lo
ad&dial_page=area-code
Details of Configuration Parameters:
Parameters
Permitted Values
Default
dialplan.area_code.code
String within 16
characters
Blank
Description:
Configures the area code to be added before the entered numbers when dialing out.
Example:
dialplan.area_code.code = 0592
Note: The length of the entered number must be between the minimum length configured
by the parameter “dialplan.area_code.min_len” and the maximum length configured by the
parameter “dialplan.area_code.max_len”. It works only if the values of the parameters
“dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Area Code->Code
Phone User Interface:
None
dialplan.area_code.min_len
Integer from 1 to 15
1
Description:
Configures the minimum length of the entered numbers.
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Area Code->Min Length (1-15)
Phone User Interface: