EasyManua.ls Logo

Yealink SIP-T58V/A

Yealink SIP-T58V/A
842 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Advanced Features
231
Parameters
Permitted Values
Default
None
dialplan.area_code.max_len
Integer from 1 to 15
15
Description:
Configures the maximum length of the entered numbers.
Note: The value must be larger than the minimum length. It works only if the values of the
parameters “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Web User Interface:
Settings->Dial Plan->Area Code->Max Length (1-15)
Phone User Interface:
None
dialplan.area_code.line_id
0, Integer from 1 to
16
Blank (for
all lines)
Description:
Configures the desired line to apply the area code rule. The digit 0 stands for all lines. If it is
left blank, the area code rule will apply to all lines on the IP phone.
Example:
dialplan.area_code.line_id = 1
Note: Multiple line IDs are separated by commas. It works only if the values of the
parameters “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Web User Interface:
Settings->Dial Plan->Area Code->Account
Phone User Interface:
None
To configure an area code rule via web user interface:
1. Click on Settings->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15) fields.
3. Enter the desired line ID in the Account field or leave it blank.

Table of Contents

Related product manuals