Administrator’s Guide for SIP-T5 Series Smart Media Phones
272
4. Select the desired group from the pull-down list of Group.
5. Select the desired account from the pull-down list of Account.
If Auto is selected, the IP phone will use the default account when placing calls to the
contact from the local directory.
6. Select the desired account from the pull-down list of Photo.
7. Click Add to add the contact.
To add a group to the local directory via phone user interface:
1. Tap .
2. Tap Settings.
3. Tap New Group.
4. Enter the desired group name in the highlighted field.
5. Tap to accept the change.
6. Tap to specify a ring tone for the group.
7. Tap the desired ring tone in the pop-up dialog box.
8. Tap OK to accept the change.
To import an XML contact list file via web user interface:
1. Click on Directory->Local Directory.
To Next Page
Loading...
Need help?
General
