Yealink SIP-T58V/A

Configuring Advanced Features
289
Parameters
Permitted Values
Default
None
To configure auto answer via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.
3. Select the desired value from the pull-down list of Auto Answer.
4. Click Confirm to accept the change.
To configure a period of delay time for auto answer via web user interface:
1. Click on Features->General Information.
2. Enter the desired time in the Auto-Answer Delay(1~4s) field.
3. Click Confirm to accept the change.