Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
288
Parameters
Permitted Values
Default
Description:
Enables or disables auto answer feature for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone can automatically answer an incoming call.
Note: The IP phone cannot automatically answer the incoming call during a call even if auto
answer is enabled.
Web User Interface:
Account->Basic->Auto Answer
Phone User Interface:
Settings->Features->Auto Answer->Account X
features.auto_answer_delay
Integer from 1 to
4
1
Description:
Configures the delay time (in seconds) before the IP phone automatically answers an
incoming call.
Note: It works only if the value of the parameter “account.X.auto_answer” is set to 1
(Enabled).
Web User Interface:
Features->General Information->Auto-Answer Delay(1~4s)
Phone User Interface:
None
features.auto_answer_tone.enable
0 or 1
1
Description:
Enables or disables the phone to play a warning tone when an incoming call is automatically
answered.
0-Disabled
1-Enabled
Note: For the call coming from a SIP account, it works only if the value of the parameter
“account.X.auto_answer” is set to 1 (Enabled). It is also applicable to IP calls.
Web User Interface:
Features->General Information->Enable auto answer tone
Phone User Interface: