Yealink SIP-T58V/A - Early Media; 180 Ring Workaround

Configuring Advanced Features
299
Privacy: id
Content-Length: 302
The anonymous call on code and anonymous call off code configured on IP phones are used to
activate/deactivate the server-side anonymous call feature. They may vary on different servers.
Send Anonymous Code feature allows IP phones to send anonymous on/off code to the server.
Procedure
Anonymous call can be configured using the following methods.
Central Provisioning
(Configuration File)
<MAC>.cfg
Configure anonymous call.
Parameters:
account.X.anonymous_call
account.X.send_anonymous_cod
e
account.X.anonymous_call_onco
de
account.X.anonymous_call_offco
de
Web User Interface
Configure anonymous call.
Navigate to:
http://<phoneIPAddress>/servle
t?m=mod_data&p=account-basi
c&q=load&acc=0
Phone User Interface
Configure anonymous call.
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
account.X.anonymous_call
(X ranges from 1 to 16)
0 or 1
0
Description:
Triggers the anonymous call feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the IP phone will block its identity from showing up to the callee when
placing a call. The callee’s phone touch screen presents anonymous instead of the caller’s
identity.
Web User Interface: