Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
300
Parameters
Permitted
Values
Default
Account->Basic->Local Anonymous
Phone User Interface:
Settings->Features->Anonymous->Line X->Local Anonymous
account.X.send_anonymous_code
(X ranges from 1 to 16)
0 or 1
0
Description:
Configures the IP phone to send anonymous on/off code to activate/deactivate the
server-side anonymous call feature for account X.
0-Off Code
1-On Code
If it is set to 0 (Off Code), the IP phone will send anonymous off code to the server when
you deactivate the anonymous call feature.
If it is set to 1 (On Code), the IP phone will send anonymous on code to the server when
you activate the anonymous call feature.
Web User Interface:
Account->Basic->Send Anonymous Code
Phone User Interface:
Settings->Features->Anonymous->Line X->Send Anony Code
account.X.anonymous_call_oncode
(X ranges from 1 to 16)
String within 32
characters
Blank
Description:
Configures the anonymous call on code to activate the server-side anonymous call feature
for account X.
Example:
account.1.anonymous_call_oncode = *72
Note: It works only if the value of the parameter “account.X.send_anonymous_code” is set
to 1 (On Code).
Web User Interface:
Account->Basic->Send Anonymous Code->On Code
Phone User Interface:
Settings->Features->Anonymous->Line X->On Code
account.X.anonymous_call_offcode
(X ranges from 1 to 16)
String within 32
characters
Blank
Description: