Configuring Advanced Features
301
Configures the anonymous call off code to deactivate the server-side anonymous call
feature for account X.
Example:
account.1.anonymous_call_offcode = *73
Note: It works only if the value of the parameter “account.X.send_anonymous_code” is set
to 0 (Off Code).
Web User Interface:
Account->Basic->Send Anonymous Code->Off Code
Phone User Interface:
Settings->Features->Anonymous->Line X->Off Code
To configure anonymous call via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.
3. Select the desired value from the pull-down list of Local Anonymous.
4. Select the desired value from the pull-down list of Send Anonymous Code.
5. (Optional.) Enter the anonymous call on code in the On Code field.
6. (Optional.) Enter the anonymous call off code in the Off Code field.
7. Click Confirm to accept the change.
To configure the anonymous call via phone user interface:
1. Tap Settings->Features->Anonymous.
2. Tap the desired line.
3. Tap the On radio box in the Local Anonymous field.
4. (Optional.) Tap the On or Off radio box in the Send Anony Code field.
To Next Page
Loading...
Need help?
General
