Yealink SIP-T58V/A

Configuring Advanced Features
339
Parameters
Permitted Values
Default
Example:
account.1.always_fwd.target = 1003
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Target
Phone User Interface:
Settings->Features->Call Forward->AccountX->Always Forward->Forward To
account.X.always_fwd.on_code
(X ranges from 1 to 16)
String within 32
characters
Blank
Description:
Configures the always forward on code to activate the server-side always forward feature
for account X.
The IP phone will send the always forward on code and the pre-configured destination
number (configured by the parameter “account.X.always_fwd.target”) to the server when
you activate always forward feature for account X on the IP phone.
Example:
account.1.always_fwd.on_code = *72
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->On Code
Phone User Interface:
Settings->Features->Call Forward->AccountX->Always Forward->On Code
account.X.always_fwd.off_code
(X ranges from 1 to 16)
String within 32
characters
Blank
Description:
Configures the always forward off code to deactivate the server-side always forward
feature for account X.
The IP phone will send the always forward off code to the server when you deactivate
always forward feature for account X on the IP phone.
Example:
account.1.always_fwd.off_code = *73
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Off Code
Phone User Interface: