Configuring Advanced Features
347
Configures the busy forward off code to deactivate the server-side busy forward feature.
The IP phone will send the busy forward off code to the server when you deactivate busy
forward feature on the IP phone.
Example:
forward.busy.off_code = *75
Note: It works only if the value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->Busy Forward->Off Code
Phone User Interface:
Settings->Features->Call Forward->Busy Forward->Off Code
Description:
Triggers the no answer forward feature to on or off for the IP phone.
0-Off
1-On
If it is set to 1 (On), incoming calls are forwarded to the destination number (configured by
the parameter “forward.no_answer.target”) after a period of ring time.
Note: It works only if the value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward
Phone User Interface:
Settings->Features->Call Forward->No Answer Forward->No Answer Forward
String within 32
characters
Description:
Configures the destination number of the no answer forward for the IP phone.
Example:
forward.no_answer.target = 3603
Note: It works only if the value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->Target
Phone User Interface:
Settings->Features->Call Forward->No Answer Forward->Forward To
To Next Page
Loading...
Need help?
General
