Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
348
Parameters
Permitted Values
Default
forward.no_answer.timeout
Integer from 0 to
20
2
Description:
Configures ring times (N) to wait before forwarding incoming calls.
Incoming calls will be forwarded when not answered after N*6 seconds.
Note: It works only if the value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->After Ring Time (0~120s)
Phone User Interface:
Settings->Features->Call Forward->No Answer Forward->After Ring Time
forward.no_answer.on_code
String within 32
characters
Blank
Description:
Configures the no answer forward on code to activate the server-side no answer forward
feature.
The IP phone will send the no answer forward on code and the pre-configured destination
number (configured by the parameter “forward.no_answer.target”) to the server when you
activate no answer forward feature on the IP phone.
Example:
forward.no_answer.on_code = *76
Note: It works only if the value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->On Code
Phone User Interface:
Settings->Features->Call Forward->No Answer Forward->On Code
forward.no_answer.off_code
String within 32
characters
Blank
Description:
Configures the no answer forward off code to deactivate the server-side no answer
forward feature.
The IP phone will send the no answer forward off code to the server when you deactivate
no answer forward feature on the IP phone.
Example:
forward.no_answer.off_code = *77