Yealink SIP-T58V/A

Configuring Advanced Features
349
Parameters
Permitted Values
Default
Note: It works only if the value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->Off Code
Phone User Interface:
Settings->Features->Call Forward->No Answer Forward->Off Code
features.fwd_diversion_enable
0 or 1
1
Description:
Enables or disables the IP phone to present the diversion information when an incoming
call is forwarded to your IP phone.
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Diversion/History-Info
Phone User Interface:
None
forward.international.enable
0 or 1
1
Description:
Enables or disables the IP phone to forward incoming calls to international numbers (the
prefix is 00).
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Fwd International
Phone User Interface:
Settings->Advanced (default password: admin)->FWD International->FWD International
To specify the authorized numbers when call forward is enabled via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Forward Emergency.
3. Enter the desired value in the Forward Authorized Numbers field.