Yealink SIP-T58V/A User Manual

Configuring Advanced Features
409
q=load
Phone User Interface
Configure incoming intercom call
feature.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.intercom.allow
0 or 1
1
Description:
Enables or disables the IP phone to answer an incoming intercom call.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will reject incoming intercom calls and sends a busy
signal (configured by the parameter “features.normal_refuse_code”) to the caller.
If it is set to 1 (Enabled), the IP phone will automatically answer an incoming intercom call.
Web User Interface:
Features->Intercom->Accept Intercom
Phone User Interface:
Settings->Features->Intercom->Accept Intercom
features.intercom.mute
0 or 1
0
Description:
Enables or disables the IP phone to mute the microphone when answering an intercom call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the microphone is muted for intercom calls, and then the other
party cannot hear you.
Note: It works only if the value of the parameter “features.intercom.allow” is set to 1
(Enabled).
Web User Interface:
Features->Intercom->Intercom Mute
Phone User Interface:
Settings->Features->Intercom->Intercom Mute
features.intercom.tone
0 or 1
1
Description:

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English