Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
410
Parameters
Permitted Values
Default
Enables or disables the IP phone to play a warning tone when answering an intercom call.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “features.intercom.allow” is set to 1
(Enabled).
Web User Interface:
Features->Intercom->Intercom Tone
Phone User Interface:
Settings->Features->Intercom->Intercom Tone
features.intercom.barge
0 or 1
0
Description:
Enables or disables the IP phone to answer an incoming intercom call while there is already
an active call on the IP phone.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will handle an incoming intercom call like a waiting
call while there is already an active call on the IP phone.
If it is set to 1 (Enabled), the IP phone will automatically answer the intercom call while there
is already an active call on the IP phone and place the active call on hold.
Note: It works only if the values of parameters “features.intercom.allow” and
“call_waiting.enable” are set to 1 (Enabled).
Web User Interface:
Features->Intercom->Intercom Barge
Phone User Interface:
Settings->Features->Intercom->Intercom Barge
To configure intercom via web user interface:
1. Click on Features->Intercom.