Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
22
Parameters:
static.network.primary_dns
static.network.secondary_dns
Web User Interface
Configure the static DNS feature.
Configure static DNS address.
Navigate to:
http://<phoneIPAddress>/servlet?m=mod_
data&p=network&q=load
Phone User Interface
Configure the static DNS feature.
Configure static DNS address.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.network.static_dns_enable
0 or 1
0
Description:
Triggers the static DNS feature to on or off.
0-Off
1-On
If it is set to 0 (Off), the IP phone will use the IPv4 DNS obtained from DHCP.
If it is set to 1 (On), the IP phone will use manually configured static IPv4 DNS.
Note: It works only if the value of the parameter “static.network.internet_port.type” is set to
0 (DHCP). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static DNS
Phone User Interface:
Settings->Advanced (default password: admin)->Network->WAN Port->IPv4->Type (DHCP)
->Static DNS
static.network.primary_dns
IPv4 Address
Blank
Description:
Configures the primary IPv4 DNS server.
Example:
static.network.primary_dns = 202.101.103.55
Note: It works only if the value of the parameter "static.network.static_dns_enable" is set to 1