Configuring Advanced Features
501
2. Select the desired codec from the pull-down list of Multicast Codec.
3. Click Confirm to accept the change.
To configure two sending multicast addresses via web user interface:
1. Click on Directory->Multicast IP.
2. Enter the sending multicast address and port number in the Paging Address field.
3. Enter the label in the Label field.
The label will appear on the touch screen when sending the RTP multicast.
4. Select the desired channel from the pull-down list of Channel.
5. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General
