Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
32
Parameters
Permitted Values
Default
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->WAN Port->IPv4->Type (Static
IP) ->Secondary DNS
To configure the IP address mode via web user interface:
1. Click on Network->Basic.
2. Select desired value Mode(IPv4/IPv6).
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
To configure a static IPv4 address via web user interface:
1. Click on Network->Basic.
2. In the IPv4 Config block, mark the Static IP Address radio box.