Yealink SIP-T58V/A - Page 577

Configuring Advanced Features
555
Parameters
Permitted Values
Default
account X.
Example:
account.1.sip_server.1.address = yealink.pbx.com
Web User Interface:
Account->Register->SIP Server Y->Server Host
Phone User Interface:
Settings->Advanced (default password: admin) ->Accounts->Account X->SIP ServerY
account.X.sip_server.Y.port
(X ranges from 1 to 16, Y ranges from 1 to 2)
Integer from 0 to
65535
5060
Description:
Configures the port of the SIP server Y that specifies registrations for account X.
Example:
account.1.sip_server.1.port = 5060
Note: If the value of this parameter is set to 0, the port used depends on the value specified
by the parameter “account.X.sip_server.Y.transport_type”.
Web User Interface:
Account->Register->SIP Server Y->Port
Phone User Interface:
None
account.X.sip_server.Y.expires
(X ranges from 1 to 16, Y ranges from 1 to 2)
Integer from 30 to
2147483647
3600
Description:
Configures the registration expiration time (in seconds) of the SIP server Y for account X.
Example:
account.1.sip_server.1.expires = 3600
Web User Interface:
Account->Register->SIP Server Y->Server Expires
Phone User Interface:
None
account.X.sip_server.Y.retry_counts
(X ranges from 1 to 16, Y ranges from 1 to 2)
Integer from 0 to
20
3