Yealink SIP-T58V/A User Manual

Administrator’s Guide for SIP-T5 Series Smart Media Phones
38
Full-duplex
Full-duplex transmission refers to transmitting voice or data in both directions at the same time;
this means one device can send data on the line while receiving data. You can configure the
full-duplex transmission on both Internet port and PC port for the IP phone to transmit in
10Mbps, 100Mbps or 1000Mbps.
Procedure
The transmission methods of Ethernet ports can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.c
fg
Configure the transmission methods of the
Ethernet ports.
Parameters:
static.network.internet_port.speed_duplex
static.network.pc_port.speed_duplex
Web User Interface
Configure the transmission methods of the
Ethernet ports.
Navigate to:
http://<phoneIPAddress>/servlet?m=mod_
data&p=network-adv&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.network.internet_port.speed_duplex
0, 1, 2, 3, 4 or 5
0
Description:
Configures the transmission method of the Internet port.
0-Auto Negotiate
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English